Steam and liquid heating

Heating modules for heating HeetSheet tanks are made of 304 stainless steel of caliber 26 in accordance with the requirements of the ASTM A240 standard. The welded cellular structure provides numerous fluid flow paths, which reduces the risk of congestion typical of single-channel structures.For operation at temperatures up to 190 °C, a non-hardening heat-conducting mixture is applied to the surface of the HeetSheet module by the factory method, which is in contact with the tank wall. This is done to eliminate air and ensure good thermal contact.Heetsheets are available in different sizes and are folded in such a way as to match the radius of the tank. Stainless steel connecting tubes are provided for the supply of steam and other heating or cooling media. Fittings that are not included in the standard delivery package are used to connect the inlet and outlet pipes to the pre-insulated ThermoTube medium supply and outlet pipeline. The tubes of the Thermotube are supplied separately.AdvantagesEach design is based on known and predicted heat transfer coefficients.Thermon heat-conducting mixtures provide a high heat transfer rate.The area of the heating panel should be only from 1/2 to 1/3 of the surface area of the heated tank.Pre-rolled modules guarantee speed and ease of installation.The modules can be used for both heating and cooling.Cross-contamination of the heating medium and the contents of the tank/container is not possible.

The SafeTrace DLS-IT steam tracing is a metal heating tube coated with composite materials, which are used to reduce thermal conductivity. The SafeTrace steam tracing provides predicted thermal output power along the entire length of the heated pipe in order to prevent overheated sections and overheating of the entire pipe. The steam tracing replaces non-insulated metal traces, the use of which often leads to unproductive energy costs and excessive pipeline stress, since when they are used, the temperature of the pipes goes beyond the required or desired parameters. SafeTrace DLS-IT steam tracing have a yellow protective identification sheath, warning of the presence of potentially hazardous materials, such as steam, in accordance with the requirements of the ASME/ANSI A13.1-1996 standard. All SafeTrace IT traces also comply with the requirements of the ASTM Std C-1055 standard, according to which the human skin temperature should not exceed 58 °C for five seconds when in contact with hot surfaces. The SafeTrace DLS-IT steam tracing is delivered in long bays. It can be stretched continuously from the collector of the steam supply system along the pipe to the condensate drain collector.

ThermoTube pre-insulated tubes are single-layer insulated tubes that are ideal for transporting hot and cold liquids and gases. These tubes have been designed specifically for steam supply and condensate drainage lines. In addition, these tubes are used for the organization of unheated sampling lines.The preliminary insulation of the ThermoTube tube consists of non-hygroscopic fiberglass, heat-reflecting foil and an outer shell to protect against the effects of adverse weather conditions. ThermoTube working tubes can be made of many different materials with walls of different thicknesses and different outer shells.FEATURESFast delivery and installationLong bays minimize wasteExcellent protection against adverse weather conditions