The catalog of COLORTERM presents all the materials of COLORTERM, with which LLC "COLORTERM" works.
LLC "COLORTERM" can guarantee you quality and long service life.
PRE-INSULATED HEATED PULSE TUBES FOR INSTRUMENTATION
The ThermTrac system is an economical alternative to standard heating systems with sequential resistance in extended pipelines, since it eliminates the need for an extensive power distribution system. The system allows to provide electric heating of the pipeline with a length of up to 25 kilometers from just one power supply point.
The operational flexibility of the system allows it to be used to maintain temperature, protect against freezing and warming up.
The system generates heat in the heating pipe by means of a reverse current passing through the resistance of the inner surface of the heating pipe.
There is no voltage and current on the outer surface of the heating tube.
ThermTrac insulated core is the basis of a heating system based on the Thermon skin effect. This core is developed by Thermon individually for each customer, and its dielectric insulation and wear-resistant shell meet the conditions of specific customer projects. Copper cores with polyolefin insulation can be used in projects to protect against freezing and maintain low temperatures. Fluoropolymer insulated cores provide excellent temperature characteristics, operational flexibility and durability required for high temperature systems.
Technical specifications
- Output power up to 165 W/m
- The operating voltage of the system is up to 5 kV
- Maintenance temperature up to 200 °C
- Exposure temperature up to 260 °C
- Minimum installation temperature up to -40 °C
- Temperature class T6-T2
Construction
- Twisted nickel-plated copper core.
- Fluoropolymer or polyolefin dielectric insulation.
- Fluoropolymer or polyolefin shell, resistant to abrasion.
- Carbon steel heating tube.
Certificates / Permissions
II 2 G Ex eb IIC T2-T6 DEKRA 12ATEX0175X
II 2 D Ex tb IIIC T300 °CT 85 °C
International Electrotechnical Commission
IEC Certification System for Explosive Atmospheres DEK 12.0055X
Factory Mutual Research
Normal zones
Hazardous (classified) areas
Class I, Section 2, groups B, C and D
Class II, section 2, groups F and G
Class III, sections 1 and 2
Class I, Zone 2, Group IIC
