HPT POWER LIMIT CABLE
Catalog

The catalog of COLORTERM presents all the materials of COLORTERM, with which LLC "COLORTERM" works.

LLC "COLORTERM" can guarantee you quality and long service life.

HPT POWER LIMIT CABLE

HPT's high-performance heating cables of extreme power are designed specifically to maintain process temperature and frost protection in environments where maintaining high temperatures is required. HPT cables are designed to operate in an environment with a high exposure temperature associated with steaming. The coil-doped resistor of the heating element provides a fixed heat transfer of the HPT cable. Its positive temperature coefficient reduces the output power of the cable when the temperature of the heated product increases and allows you to install the cable overlap. The composite construction of the heating element and the fibrous base in combination with an additional layer of fibrous gasket provide exceptional strength of the heating cable. HPT cables are certified for use in normal (unclassified) and potentially explosive zones according to the ATEX, TRTS and IECEx Scheme standards.

Cable construction:

  1. Nickel-plated copper cores (3.3 mm2);
  2. Composite metal alloy thread;
  3. Heater bus connection (not shown);
  4. Fiberglass braid (not shown)
  5. Fluoropolymer dielectric insulation
  6. Nickel-plated copper braid;
  7. Fluoropolymer shell.

Technical specifications

  • Rated supply voltage 1 220-230 V


Application Maximum maintenance temperature

  • HPT-5 215°C
  • HPT-10 195°C
  • HPT-15 180°C
  • HPT-20 150°C
  • Maximum exposure temperature with power off 260°C
  • Minimum installation temperature -60°C


Minimum bending radius

  • at -15°C 10 mm
  • at -60°C 32 mm


Temperature class 2

  • With a stable design of 3 T2 - T6


  1. The cable can be connected to another voltage; for assistance in designing, please contact the company "COLORTERM".
  2. The temperature class corresponds to the instructions of the international testing committee.
  3. COLORTERM heating cables are approved for use for the specified temperature classes on the basis of a stabilized design, which allows the cable to be used in explosive zones without thermostats-limiters.

Certificates / Permissions

Gosgortehnadzor of Russia for use in explosive zones.

Explosion protection marking: 2ExeIIT3.

Meets the requirements of the TR CU.