SUBMERSIBLE HEATERS

Heaters inserted into pipes - MX series

Designed for uniform distribution of heat across storage tanks for high viscosity liquids such as asphalt, molasses, resin, paint, glue, wax and oil, without causing burning or coking of these liquids.

The standard voltage range is from 208 to 660 V. The device can be equipped with a NEMA 4 enclosure for outdoor use or an explosion-proof terminal housing for use in hazardous areas. Standard heaters use heavy-duty elements with an alloy shell with flanges with a diameter of 3" (150 pounds) or threaded plugs of the NPT standard with a diameter of 2" with moisture-resistant terminal housings. Additional functions: prefabricated control systems, individual power or voltage, built-in thermostats, increased limit values and explosion-proof enclosures. TRTS certified.

Flange heaters — CX series

Submersible heaters are mainly used for process heating in explosive and safe areas, for example, in pressure vessels and in pipe assemblies

Technological media can be water, heavy and light hydrocarbons, acids, polymers, salts and gases, depending on the length of the element, are produced with a power of 500 W - 2.5 MW with a supply voltage 120, 208, 220, 380, 400, 415, 600, 660, 690 V.

Screw-in heaters - CX series

Designed for heating systems of water, oil, gas and mildly aggressive liquids, standard devices include threaded plugs with a diameter from 1" to 2.5". Heaters can be made of copper, Incoloy ® and Inconel ® materials, nickel-plated steel and other metal materials. Additionally, the devices can be equipped with a thermostat. Individually designed heaters can have any voltage, up to 660 V. The shell and plug of such heaters can be made of special materials. Heaters can have universal, moisture-resistant and explosion-proof terminal housings. The devices comply with the requirements of Chapters 1 and 2 of the API Bulletin 614 Certified by EAC

Submersible heaters attached to the edge of the surface - DX, HX, QM series

Designed for liquid heating systems. The standard voltage range is from 208 to 660 V. The power range is from 3 to 7.5 kW for heaters with one element and from 9 to 22.5 kW for devices with three elements. The shell can be made of copper, Incoloy ® and Inconel ® materials, nickel-plated steel and other metal materials. The coupling can be made of Tefl ® material or quartz. Certified by CSA.