Submersible heaters

Heaters inserted into pipes - MX series Designed for uniform distribution of heat across storage tanks for high viscosity liquids such as asphalt, molasses, resin, paint, glue, wax and oil, without causing burning or coking of these liquids.The standard voltage range is from 208 to 660 V. The device can be equipped with a NEMA 4 enclosure for outdoor use or an explosion-proof terminal housing for use in hazardous areas. Standard heaters use heavy-duty elements with an alloy shell with flanges with a diameter of 3" (150 pounds) or threaded plugs of the NPT standard with a diameter of 2" with moisture-resistant terminal housings. Additional functions: prefabricated control systems, individual power or voltage, built-in thermostats, increased limit values and explosion-proof enclosures. TRTS certified. Flange heaters — CX seriesSubmersible heaters are mainly used for process heating in explosive and safe areas, for example, in pressure vessels and in pipe assembliesTechnological media can be water, heavy and light hydrocarbons, acids, polymers, salts and gases, depending on the length of the element, are produced with a power of 500 W - 2.5 MW with a supply voltage 120, 208, 220, 380, 400, 415, 600, 660, 690 V. Screw-in heaters - CX seriesDesigned for heating systems of water, oil, gas and mildly aggressive liquids, standard devices include threaded plugs with a diameter from 1" to 2.5". Heaters can be made of copper, Incoloy ® and Inconel ® materials, nickel-plated steel and other metal materials. Additionally, the devices can be equipped with a thermostat. Individually designed heaters can have any voltage, up to 660 V. The shell and plug of such heaters can be made of special materials. Heaters can have universal, moisture-resistant and explosion-proof terminal housings. The devices comply with the requirements of Chapters 1 and 2 of the API Bulletin 614 Certified by EAC Submersible heaters attached to the edge of the surface - DX, HX, QM seriesDesigned for liquid heating systems. The standard voltage range is from 208 to 660 V. The power range is from 3 to 7.5 kW for heaters with one element and from 9 to 22.5 kW for devices with three elements. The shell can be made of copper, Incoloy ® and Inconel ® materials, nickel-plated steel and other metal materials. The coupling can be made of Tefl ® material or quartz. Certified by CSA.

Plate heaters - FS, SD, SS seriesDesigned for use in various heating systems, including surface heating systems, working air heating systems, lowering resistors for pipelines on railways and load batteries, frost protection systems and many others. They can be equipped with fins to increase heat transfer to the air. Made of high-quality materials, including high-resistance heat-resistant alloy wire and corrosion-resistant aluminum-coated steel shell (maximum shell temperature is 1000°F / 538°C) or corrosion-resistant stainless steel shell (maximum shell temperature is 1200 °F/ 649°C). Certified by EAC Circulation heaters - EX series.Provide linear electric heating in heating systems with forced circulation. The power of the heaters ranges from 0.6 to 5000 kW. Heaters of higher power can also be manufactured. The products can be additionally equipped with thermostats, welded stainless steel parts and moisture-proof or explosion-proof housings. Increased performance limits may also be provided for them. Containers and heaters are registered in the CRN registry for use in Canada. Devices are allowed to be marked U, U2 and N, depending on the classification of ASME codes (Section VIII or III). Certified by TR CU.

Heating units with forced air supply - GE series Designed for use in conventional heating systems for industrial and commercial premises. Case with phosphate epoxy coating made of 18-gague thick steel. Additional equipment installed at the factory in accordance with the customer's requirements, including thermostats, controls and a wall mounting bracket. 35 models, the power range of which is from 2 to 40 kW, and the voltage range is from 208 to 600 V. EAC certified.

Heavy-duty heating units with forced air supply - GX series.Designed for use in harsh operating conditions in industrial environments, the heavy-duty design allows you to reduce costs due to downtime and maintenance costs that usually accompany heaters of standard design. 18 models, the power range of which is from 15 to 50 kW, and the voltage range is from 208 to 600 V. Devices with a capacity of 40 kW and 50 kW have a separate load (50%) for power management systems with remote control

Explosion-proof catalytic gas heaters WX.Designed for indoor heating or spot heating in hazardous areas. Heating, freezing protection of equipment, heating for drying or vulcanization processes. 24 models running on natural gas or propane, performance 1 250 – 60 000 b. i.e./ hour, the voltage range is 12 - 600 V. The depth of the cabinets is 3 inches (76 mm). The connection points for gas, electricity and accessories are located on the back side of the heater. CE mark, ATEX and EAC certified, Ex d IIC Gb class.