Boxes for input and branching of the terminator series

Non-metallic terminal sealing kits for Terminator heating cables are specially designed for quick and easy installation of Thermon heating cables. The complex design of these non-metallic kits combines in one set a mounting column for installation on a pipeline, an insulating sleeve of a heating cable and a cable deformation compensation system. To make it easier to install the kit cover and at the same time increase its safety, the kit cover is fixed without using screws (to remove the cover after installing the kit, you will need a special tool). Terminator kits can be used in normal (non-classified) zones, and they are also certified in accordance with the ATEX directive, which provides for their use in zones classified in categories 2 and 3 (zone 1 and 2). ETK circuit assembly kits should be used with all sets for connecting parallel resistance heating cables manufactured by Thermon. The SX cable termination kit includes a connecting sleeve, a plug, cold-curing glue and a signal sticker. The kits for the end sealing of HPT and FP cables also include a piece of tape and an insulating sleeve. The SCTK splice and end sealing kits should be used when performing splice from the outside of the insulation using any kit for connecting parallel resistance heating cables manufactured by Thermon. The SX cable end sealing kit includes 2 splice sleeves, couplings for splicing wires of various types and cold-curing glue. The kits for the end sealing of HPT and FP cables also include an insulating sleeve.

Terminator Beacon circuit serviceability indicator kits are specially designed for quick and easy installation of Thermon self-regulating heating cables of parallel resistance of maximum power with polymer insulation manufactured by Thermon. The complex design of these non-metallic kits combines in one set a mounting column for installation on a pipeline, an insulating sleeve of a heating cable and a cable deformation compensation system with a voltage indicator at the end of the circuit. To make it easier to install the kits, the use of mounting screws is not required during their installation. The Terminator Beacon kit is equipped with a green LED indicator lamp of increased brightness, which is clearly visible both during the day and at night. This kit can also be equipped with a red LED indicator lamp of increased brightness. The domed lens allows you to see the indicator well from a great height. Terminator Beacon kits can be used in normal (not categorized) zones, and they are also certified in accordance with the ATEX directive, which provides for their use in zones classified in categories 2 and 3 (zone 1 and 2).

Terminator Beacon circuit serviceability indicator kits are specially designed for quick and easy installation of Thermon self-regulating heating cables of parallel resistance of maximum power with polymer insulation manufactured by Thermon. The complex design of these non-metallic kits combines in one set a mounting column for installation on a pipeline, an insulating sleeve of a heating cable and a cable deformation compensation system with a voltage indicator at the end of the circuit. To make it easier to install the kits, the use of mounting screws is not required during their installation. The Terminator Beacon kit is equipped with a green LED indicator lamp of increased brightness, which is clearly visible both during the day and at night. This kit can also be equipped with a red LED indicator lamp of increased brightness. The domed lens allows you to see the indicator well from a great height. Terminator Beacon kits can be used in normal (not categorized) zones, and they are also certified in accordance with the ATEX directive, which provides for their use in zones classified in categories 2 and 3 (zone 1 and 2).

Terminator ZP-PTD100-WP 4 mm2 1M 25/3M 20 (Std.) - connecting non-metallic box, IP66, for PTD-100 sensor, with wall mounting kit.Scope of applicationHeating of pipelines;Tank heating;Heating of equipment.